作者 阿尔法科技 所...
阅读更多这是穆尼和更多! 你真的需要这么好的粘度计吗? 是的你是。
是的,如果您只需要一个门尼测试来验证您的材料,您可以使用更便宜的仪器。 您还将获得更多的可变性、更少的可靠性和更慢的测试周期。 所以我认为成本/收益比显然有利于 Premier MV。”
~ Jessica Gialamas ,Alpha Technologies 应用工程师
如何将 Premier MV 与所有其他人进行比较。
卓越的模具冷却和温度稳定性——得益于轻量模具和专有的数字温度控制,Premier MV 提供了出色的温度稳定性,与以前的型号相比,模具冷却时间减少了 45%。 你的粘度计能做到吗?
多速测量– 控制多个剪切速率以建立幂律曲线和其他剪切粘度图。
转子对齐检测——通过关闭未对齐的转子来防止对转子和轴的意外损坏,并减少更换转子和轴所需的时间和成本。
自动静重校准——允许在几秒钟内校准仪器。
高级验证程序——确保您满足 ASTM 规定的设定点。
标准多区应力松弛和变速数字电机——对于获取高级处理信息(例如识别触变材料)至关重要。
可选的长寿命 O 型圈– 通过减少频繁的清洁和校准,让您的仪器长时间工作。

Standard Premier Features
- Custom Electronics
- Superior Die Cooling
- Better Heating Control
- Always Aligned
- Cast Aluminum Frame
- Touch Screen Easy
- Storage Drawer
Faster. Better Control. Better Resolution.
Custom Electronics that are matched to the instrument. Better control. Better resolution. Other RPAs use off-the-shelf PLCs to save money, but can’t fine-tune their electronics to their instrument – often overshoot set points then spend valuable time stabilizing.
Efficient Die Cooling
Efficient die cooling that gets your instrument ready for the next test. Why wait 20 minutes for dies to cool down when Premier instruments take about 6 minutes. (And our instruments are smart enough to know when the instrument reaches the right temperature. Others, not so much.)
Custom Designed Heating Control System
Because they are designed specifically for Premier instruments, our heating control system ramps up heating cycles faster and maintains control for more accurate cure times and more efficient production.
Dynamic Symmetry and Smart Alignment
More accurate measurements. No loss of signal thanks to Premier’s Smart Alignment and Dynamic Symmetry. On-target, parallel die closing, high stiffness and constant closing force.
Lighter. Stronger. Stiffer.
Work smarter not harder with lighter, cast aluminum frames. Not only are Premier frames light, but incredibly stiff for less variability. What’s more, Premier instruments incorporate frame compliance into the calibration for better data.
Control with a Personal Touch
Our incredibly intuitive user interface comes to you through a large, bright, touch screen panel that lets you navigate to the view you want or the information you need, fast and easy.
Storage Drawer
Okay… that’s a really small thing. But QA and R&D technicians love having a way to keep their workspace clear. 应用
表征未固化橡胶和聚合物材料的最常用的测试方法。
通过观察转子停止后的扭矩衰减来测量弹性材料行为,提供聚合物支化和加工之间的重要关联。
确定橡胶化合物的固化开始。 获取关键数据以帮助围绕生产流程进行决策。
规格
频率: | 100 cpm (1.67 赫兹) |
温度范围: | 环境温度为 446°F (230°C) |
拉紧: | 0.5 标准(7%); 0.2、1.0、3.0 和 7.17 度 |
(2.8%、14%、42% 或 100%) 可用 ML、MH、MH-ML、Ts1、Ts2、 | |
在船上: | T10、T50、T90、S? 在 ML,S? 在 MH、TD 在 ML、TD 在 MH、最大固化速率、最大固化速率时间、压力点 PH-PL 和压力时间点 |
测试标准: | 符合 ASTM D5289、ISO6502 和 DIN 53529 |
电气: | 100/110/120/130 VAC+/- 10%, 60 +/- 3Hz, 10amp, 单相 200,220,240,260 VAC +/-10%, 50Hz +/- 3amp 单相 |
空气压力: | 最低 60 psi (414Kpa, 4.2 kg/cm2) |
方面: | 宽:22 英寸(56 厘米),深:26 英寸(66 厘米),高:48 英寸(122 厘米) |
重量: | 净重 350 磅(159 公斤) |
液晶触摸屏: | 155mm x 85mm,分辨率 800 x 480 |