So, there’s good news, then bad news, but then good news, again. The good news is you’re thinking of getting […]
Michele Scacchi Alpha Technologies ICYMI – Recap for people who go right to the fourth blog without reading the first one. The LAOS […]
ICYMI – Recap for people who go right to the third blog without reading the first one. The presence […]
Tracking the progress of filler dispersion – Examples of LAOS Experiments ICYMI – Recap for people who go right […]
Optimizing your Mixing Process Using LAOS Filler dispersion can affect many compound properties including strength, rebound […]
In this five part series, our applications engineer, Michele Scacchi, outlines why […]
Whether you are extruding or injection molding, the production of foaming or blowing compounds can be a tricky business. An optimal test for the proper blow-cure balance of a sponge rubber compound must measure both reactions and viscosity precisely.
Alpha’s Premier Rubber Process Analyzer (RPA) has been readily accepted by the rubber industry for routine testing of rubber compounds. By adding a standard torque and pressure 2-in-1 transducer on the upper die, you are able to measure the torque as well as the cavity pressure simultaneously.
In this post, we’ll show you how to measure cure & blowing reactions.
Does This Die Make Me Look Bloated? Rubber compounds are viscoelastic materials that are subject to die […]
Well, That’s Just Swell As we covered in Part 1 of this blog, die swell (also called […]